Precor 9.33i treadmill
A Precor 9.33i Treadmill is one of the best treadmills on the market. It has all the right features you expect from a quality machine, and costs less than you’d think. But is it known good, and does it replace other models on the market? I’ll compare the Precor to some other leading treadmills in this review.
This is the newest model in the premium series treadmill range. The good news for homeowners is that it’s part of the treadmill family and part of the Star Trac line of quality machines. As part of the Premium series, this treadmill has all the benefits of an advanced machine, but at a more reasonable price. Here’s a quick look at the Precor 9.33i treadmill and what you can expect from it.
It has the latest update of the Star Trac upper pca system. This optimizes the power supply to the motor for maximum performance. This is an important feature because a lot of people make a lot of noise when running. A high-powered motor that’s designed for high speed running results in less noise. It’s just like hitting two birds with one stone. Less noise means faster, better workouts.
A quick look inside the Precor reveals that the motors are of the double brush layout, which provides greater rigidity and longevity. The lubrication also improves the life expectancy of the motor by prolonging the life span of the bearings. The dual brushes also help eliminate slop in the bearing. This is how the Precor saves you money on treadmill maintenance: reduced slop, and extended bearing life.
The next feature, the Precor provides is an interactive eeprom test. Most treadmills don’t allow you to do an accurate, good quality eeprom test. This feature is a must-have if you want to know if there is a warranty breach. Only with this eeprom test can you find out for sure if your new Precor treadmill will give you years of trouble free fitness. The Precor 9.33i premium series comes with an interactive eeprom test.
If you’re worried about the number of knobs and switches on the treadmill, rest assured. The number of knobs and switches on the Precor 9.33i service manual are simply to make it easier for you to operate the machine. It’s pretty much just like any other treadmill. When it comes down to it, most people would rather have the fewer knobs and switches that come on many other treadmill models.
Don’t forget to save yourself money on Precor by getting a good treadmill warranty. Many of the more popular companies like Powercast and Cybex offer warranties that last for a very long time. Even though the cost may be a bit higher than many other brands, remember that it’s probably going to be cheaper in the long run. Buying a quality machine for a fraction of the price that other brands may sell for is a small price to pay when you compare it to the possible price discrepancy between a high quality machine and one that don’t have nearly as many features.
It’s pretty clear from the information in this article that the most likely reason that your Precor 9.33i treadmill is giving you an eeprom test error (upper a problem) is because the fan motor is not running optimally. Noisy motors cause a lot of wear and tear on equipment over time and it’s usually not the fan motor causing the problem. The part of the machine that often suffers the most damage from these is the deck. If you’re trying to fix a problem in your deck and it’s not the fan motor causing the problem, then you’re not going to be able to find out why the eeprom test error occurred in the first place. This means that you’ll have to try other ways to isolate what the problem is.
You’ll be able to easily find out whether your Precor 9.33i treadmill is giving you an eeprom test error code if you know where to look for it. The problem might have been caused by one of the following issues: fan motor failure, circuit board failure, or bad capacitors. If you had either of those problems, then you’re going to have to replace the entire board from the fan motor and possibly the entire treadmill motor assembly. Alternatively, it could be the motor wiring harness that’s the issue. If you’re not certain what the problem is, it might be a good idea to call a professional treadmill repair company to help you with identifying the cause.
There are some other easy ways to identify the exact cause of the malfunction so that you can avoid it in the future as well. One of the easiest ways to make sure that the problem is with the fan motor, is to check the speed controls and make sure that they are working correctly. Also, if your speed displays are not moving at all, then you may need to replace both the speed indicators and the fan assembly. You can’t expect the Precor 9.33i Elliptical Trainer to run at max speed when there is not a fan or an air blower working. Also, you should keep an eye on the timer settings and make sure that they are set up properly.
Here’s another easy way to diagnose the problem. You should remove the treadmill from your home and disconnect the power cord. Carefully look at the backside of the treadmill to see whether or not the Precor label is clearly visible. If the label is missing or hasn’t been attached correctly, you should go back to the store and purchase the correct part so that the warranty can continue. While it’s possible that someone else may have a Precor 9.33i Elliptical Trainer, it’s unlikely that the parts are still being sold in their entirety, and that means that you’re going to need to buy the parts yourself to prevent voiding your warranty.
Nordictrack elite 9500 treadmil